Dr. Bhagwan U. Sonawane
Associate Professor, PG Coordinator -M.Tech. Production (Manufacturing Engineering and Automation)
bus.mfg@coeptech.ac.in
Phone: +91-20-25507715
Qualifications
| Degree | Specialization | Year |
|---|---|---|
| B.E. | Mechanical Engineering | 2000 |
| M.E. | Mechanical Engineering (Manufacturing Process Engg.) | 2005 |
| Ph.D. | Production Engineering | 2010 |
Experience
| Type of Experience | Duration | Position | Institution/Company | From | To |
|---|---|---|---|---|---|
| Total: 21 years 8 months 9 days | |||||
| Teaching | 19 years 5 months 0 days | Associate Professor | College of Engineering Pune-411005 | 15/02/2010 | Till Date |
| Assistant Professor | College of Engineering Pune-411005 | 24/10/2005 | 14/02/2010 | ||
| Lecturer | Jawaharlal Nehru Engineering College, Aurangabad | 08/09/2005 | 15/10/2005 | ||
| Industrial | 2 years 3 months 9 days | Operating Engineer | M/S Jai Corp Ltd., Sipta Coated Steel Division, Nanded | 20/08/2001 | 13/11/2002 |
| Trainee Mech. Engineer | Ajanta Rubber Company | 01/07/2000 | 15/07/2001 | ||
Research Interest
Manufacturing Engineering, Reliability and Maintenance Engineering, Tribology, Material Forming, Tool Engineering Design
Affiliation of Professional Organisations
| Sr. No. | Name of the Professional Body | Type of Affiliation | Membership Details |
| 1 | The Institution of Engineers (India) | Associate Member (AMIE) | AM 094222-5 |
| 2 | Tribology Society of India (TSI) | Life Member (LMTSI) | LM 5224 |
Recent Teachings: (last three years teaching specified)
| Academic Year | Semester | Subject 1 | Subject 2 | Subject 3 | Subject 4 |
|---|---|---|---|---|---|
| 2024-25 | I | Kinematics and Dynamics of Machines (T.Y. B.Tech.) | Tribology in Design and Manufacturing (B.Tech.) | Tribology (F.Y. M.Tech.) | |
| 2023-24 | I | Kinematics and Dynamics of Machines (T.Y. B.Tech.) | Tribology in Design and Manufacturing (B.Tech.) | Tribology (F.Y. M.Tech.) | |
| 2023-24 | II | Reliability & Maintenance (T.Y. B.Tech.) | Reliability Engineering-IOC (F.Y. M.Tech.) | ||
| 2022-23 | I | Tool and Die Design (T.Y. B.Tech.) | Tribology in Manufacturing (B.Tech.) | Tribology (F.Y. M.Tech.) | |
| 2022-23 | II | Reliability Engineering-ILE (T.Y. B.Tech.) | Reliability Engineering-DEC (F.Y. M.Tech.) | MOOC – Introduction to Industry 4.0 and Industrial Internet of Things (F.Y. M.Tech.) | |
| 2021-22 | I | Basics of Kinematics and Dynamics of Machines (T.Y. B.Tech.) | Tribology in Manufacturing (B.Tech.) | ||
| 2021-22 | II | Kinematics and Dynamics of Machines (T.Y. B.Tech.) | Kinematics and Dynamics of Machines Lab (T.Y. B.Tech.) | Reliability Engineering-DEC (F.Y. M.Tech.) |
Awards and Recognition
1. K.F. Antia Memorial prize (Gold Medal) for the Best Research Paper published in the Institution’s Journal during year 2006-2007, by the Institution of Engineers (India).
2. Production Division Gold medal for the Best Research Paper published in Journal of the Institution of Engineers (India), Production Division, during year 2009-2010.
Funded Projects
Research Projects (Investigator/Co-Investigator):
- “Agricultural Revitalization in Higher Education Institutions of Asian Countries (AGRHI)” Co-funded by the Erasmus + Programme of the European Union. (Year 2014 to 2019, Ongoing) (Co-investigator).
- “Biomedical Engineering & Technology Incubation Centre (BETiC)” Rajiv Gandhi Science and Technology Commission, Govt. of Maharashtra (Year 2014 to 2019, Completed)
- “Uses of Hydrostatically Loaded Blank holder for Deep Drawn Shell with Uniform Thickness Strain and Wrinkle Free Surface”, Research Promotion Scheme (RPS), All India Council for Technical Education, New Delhi. (Year 2012-14, Completed)
Sponsored Research Projects (co-investigator):
- “Quantitative Risk Assessment and Development of Life of TCT Vehicle before & after Operation”, Vehicle Research and Development Establishment (Ahmednagar), Ministry of Defence, DRDO. (Year 2013-14, Completed)
- “Reliability, Safety and Hazard Analysis for Engineered Air Storage and Supply System for Project Aditya” Research and Development Establishment (Engineers), Dighi, Ministry of Defence, DRDO. (Year 2011-12, Completed)
- “Reliability Assessment, Failure Mode Effect Analysis for TCT-A5 Vehicle”, Vehicle Research and Development Establishment (Ahmednagar), Ministry of Defence, DRDO. (Year 2010-11, Completed)
- “Reliability Assessment, Failure Mode Effect Analysis and Technological solutions for innovative problems (TRIZ) for TCT-2 Vehicle”, Vehicle Research and Development Establishment (Ahmednagar), Ministry of Defence, DRDO. (Year 2010-11, Completed)
- “Reliability and Hazard Analysis of Hyperbaric Chamber for Novel Divers”, R & DE Dighi, Pune. (Year 2008-09, Completed)
Interdisciplinary Minor Research Projects (Investigator/Co-Investigator)
- “Incremental Forming of the Aluminium Alloys: Role of Texture and Microstructure and Forming Parameters”, College of Engineering Pune, (Year 2020)
- “Development of general soil testing set up”, College of Engineering Pune, (Year 2020)
Patents Granted
| # | Title | Patent Application No. | Date of Filing | Patent Granted No. | Date of Grant |
|---|---|---|---|---|---|
| 1 | A DEVICE TO MONITOR AND DETECT OBSTRUCTION IN AN ENDOTRACHEAL TUBE | 201821011502 | 28/03/2018 | 435205 | 19/06/2023 |
| 2 | AN APPARATUS FOR VIBRATION, NOISE, AND TEMPERATURE BASED CONDITION MONITORING OF A MACHINE | 202021003486 | 27/01/2020 | 445337 | 16/08/2023 |
Paper Published
| Sr. No. | Authors | Title | Details of Journal/Conference | Page Nos. |
| 2006-07 | ||||
| 01 | B.U. Sonawane and M.D. Jaybhaye | Reliability Analysis of Some Machine Tool Elements | I.E. (I) Journal Production Part, Vol. 87, September 2006 ISSN NO: 02576708 | 7-10 |
| 2009-10 | ||||
| 02 | B.U. Sonawane and B.B. Ahuja | Modelling for Availability of a Reliability – Based System using Monte Carlo Simulation and Markov Chain Analysis | I.E. (I) Journal Production Part Vol. 90, September 2009 | 36-40 |
| 03 | B.U. Sonawane, B.B. Ahuja and S. K. Basu | Non-Parametric Evaluation of Reliability of Process having Multiple Functional Attributes | Manufacturing Technology & Research an International Journal, Issue 3-4, Vol. 5, July-Dec. 2009. ISSN NO. 0973-0281 | 21-29 |
| 04 | B.U. Sonawane, Rajiv B. and P.K. Chattopadhyay | Critical and Hazard Analysis of various components in a System using Risk Priority Number and Analytic Hierarchy Process | I.E. (I) Journal Production Part Vol. 90, March 2010. | 18-23 |
| 05 | S.M. Bhosle, B.U. Sonawane and P.R. Chtragar | Experimental Determination and Formulation of Mathematical Model for Contact Deformation of Nylon and PVC. | Journal of Manufacturing Engineering, March 2010, Vol. 5, Issue 1. | 38-44 |
| 2010-11 | ||||
| 06 | Rahul Chaudhari, Ratan Shome, B.U.Sonawane, and N.R.Rajhans | Performance Evaluation of a Manufacturing Line with the help of Simulation | Proc. of the 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), June 06-08, 2011, S.V. National Institute of Technology, Surat – 395 007, Gujarat, India. | 686-690 |
| 07 | Rahul Chaudhari, Ratan Shome, B.U. Sonawane, and N.R. Rajhans | Performance Evaluation of a Manufacturing Line with the help of Simulation | International Journal of Advanced Manufacturing Systems (IJAMS), Vol. 2, No 1 January –June 2011. | 43-49 |
| 2012-13 | ||||
| 08 | V.W. Bembrekar, B.U. Sonawane, and J.K. Sawale | Experimental Investigations in Friction Drilling on Mild Steel and Aluminium by using Tungsten Carbide Tool
| International Conference on Recent Trend in Engineering & Technology, 23rd September, 2012 (ICARME-23SEP12-005), Pune, INDIA. | 1-5 |
| 09 | Yogeshwar P. Sonawane, B. U. Sonawane, B. B. Ahuja and S. K. Basu | Uses of Hydrostatically Loaded Blank Holder for Deep Drawn Shell with Uniform Thickness Strain & Wrinkle Free Surface | 4th International & 25th AIMTDR Conference, (AIMTDR 2012), 14th – 16th December, 2012, Jadavpur University Production Engineering Department, Kolkata – 700032 | 728-732 |
| 2014-15 | ||||
| 10 | J.S. Karajagikar and B. U. Sonawane | Decision Making Using Analytical Hierarchical Process (AHP) for Selection of Best Suitable Maintenance Method for Multi-spindle Automat As32 | 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) at Department of Mechanical Engineering, IIT Guwahati, Guwahati, India, Dec 12-14 2014 | pp 585-1 to 585-5 |
| 11 | J.S. Karajagikar and B. U. Sonawane | Wear Debris Analysis for A Machine Tool Gearbox (Multi-Spindle Automat AS3) Using Direct Reading Ferrography | The Institution of Engineers (I) PLC, Technical Journal, Vol. 38, Nov. 2014, ISBN No. 978-81-924990-2-4, | pp 300-304 |
| 2015-16 | ||||
| 12 | Tushar Pritlal Lilhare, B.U Sonawane, Milind Gaikwad and Santosh Dhanwate | Lead Time Reduction Using Value Stream Mapping in Powder Metallurgy Based Industry | International Journal for Science and Advance Research in Technology, (IJSART) ISSN [Online]: 2395-1052, Volume 2, Issue 4, APRIL 2016. Impact Factor : 6.224 | 392-396 |
| 2016-17 | ||||
| 13 | N.K. Kamble, B.U. Sonawane, D.S. Mane and S.S. Sarnobat | Experimental Investigation and Analysis of Fluid Assisted Blank Holding System in Deep Drawing Process for Al Alloy 1050 | 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR2016) at College of Engineering, Pune, India, Dec 16-18, 2016 | 962-966 |
| 14 | Sangramsingh Gaikwad and B.U. Sonawane | Optimization of Powder Metallurgy Process Line using Simulation Technique
| 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR2016) at College of Engineering, Pune, India, Dec 16-18, 2016 | 1852-1855 |
| 15 | J.S. Karajagikar, Vikas P. Sojitra and B.U. Sonawane | Investigate the Condition of Single Speed Worm Gearbox using Ferrography and Vibration Analysis
| 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR2016) at College of Engineering, Pune, India, Dec 16-18, 2016 | 2027-2032 |
| 16 | N. K. Kamble, B. U. Sonawane, S. S. Sarnobat and P. R. Padave | Experimental Analysis of Process Parameters in Fluid Assisted Blank Holding System in Deep Drawing Process for Al 1050 | IVTH International Conference On Production and Industrial Engineering, CPIE-2016, Dr B R Ambedkar National Institute of Technology, Jalandhar (December 19-21, 2016) CPIE-2016_paper_158 | 1-10 |
| 17 | N. K. Kamble, B. U. Sonawane and S. S. Sarnobat | Experimental Investigation and Analysis of Fluid Assisted Blank Holding System in Deep Drawing Process for Al Alloy 1050 by Using Grey Relational Analysis | International Conference on Materials, Manufacturing and Design Engineering (ICMMD 2016) at Dr. Babasaheb Ambedkar Technological University, Maharashatra, 20th and 21st December 2016 ICMMD2016_paper_76.pdf | 312-318 |
| 18 | Nitin Kamble, B.U. Sonawane and B.B. Ahuja | Study on Forming Analysis by Fab System in Deep Drawing Process [M S2062] Forming Process Using Photogrammetric Method and Numerical Simulation | Journal of Machining and Forming Technologies, Volume 8, Issue 1-2, 2016, ISSN: 1947-4369 | 41-54 |
| 19 | Nitin Kamble and B.U. Sonawane | Analysis of Process parameters by using Fluid Assisted Blank Holding System [FAB] for the steel 2062 | International Journal of Mechanical Engineering Research (IJMER), FOREX Publication, Volume 5, Issue 1 | Pages 5-10 | Date of Publication: 31 March 2017 | ID: FPMER-050106 | 5-10 |
| 20 | Jayant S. Karajagikar and Dr. Bhagwan U. Sonawane | Statistics Based Acceptance Criteria for Vibration Analysis and Maintenance Decision Making on Gearbox Application Test Rig | International Journal of Mechanical Engineering and Technology (IJMET), Volume 8, Issue 6, June 2017
http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=8&IType=6 | 525–529 |
| 2017-18 | ||||
| 21 | Jitendra S. Bhat and B.U. Sonawane | Evaluation of Performance Deterioration of the Used Equipment Oil in Sliding Pair | International Journal of Research in Advent Technology, Vol.6, No.8, August 2018. E-ISSN: 2321-9637, Available online at www.ijrat.org | 2061-2066
|
| 2018-19 | ||||
| 22 | Shital Devidas Jadhav and B.U. Sonawane | Optimization of Knee Implant Advance Biomaterial Using Finite Element Analysis | ELK Asia Pacific Journal of Manufacturing, Industrial and Production Engineering ISSN 2394-0425 (Online); EAPJMER/issn. 2394-0425/2016; Volume 4 Issue 2 (2019) | 1-12 |
| 23 | M.R. Desai, Prof. J.S. Bhat, Dr. B.U. Sonawane | Review on Tribological Modeling of Worm Gear | International Research Journal of Engineering and Technology (IRJET) Volume: 06 Issue: 06,| June 2019, e-ISSN: 2395-0056 | 535-539 |
| 24 | S. D. Gaikwad, S. V. Dravid, B.U. Sonawane, Mathew Abraham & R. K. Goyal | Dynamic mechanical and creep properties of Poly (ether ketone)-graphite nanoplatelet (GNP) nanocomposites | Polymer-Plastics Technology and Materials, Volume 58, Issue 15, 2019, DOI: 10.1080/25740881.2018.1563141 | 1691-1701 |
| 25 | Jayant S Karajagikar and Bhagwan U Sonawane | Reliability Centered Maintenance (RCM) approach for a process industry: Case study
Dr Ajay Gupta, Dr. Vishal Sharma, Dr, Anil Sachdeva | 6th International Conference On Production And Industrial Engineering (CPIE-2019), during June 8-10, 2019, at Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology Jalandhar-144011, India | 1-12 |
| 26 | JS Bhat and BU Sonawane | Analysis of wear particles in lubricating oil of worm gearbox using Ferrography | Manufacturing Technology Today- MTT, June & July issue of MTT 2019, Vol 18, No 5 (MAY 2019) | 34-40 |
| 27 | Manoj Ghadmode, Rahul Pawar and B.U. Sonawane | Forming behaviour of AA5052-H32 & AA6061-T6 during Single Point Incremental Forming | AIMTDR2018, December 2018. College of Engineering Guindy, Anna University, CEG Campus, Chennai,600025, India | |
| 28 | JS Bhat and B.U. Sonawane | Evaluation of Performance Deterioration of the Used Equipment Oil in Sliding Pair | International Journal of Research in Advent Technology, Vol.6, No.8, August 2018 E-ISSN: 2321-9637 | 2061-2066 |
| 2019-20 | ||||
| 29 | Manoj Ghadmode, Rahul Pawar and B.U. Sonawane | Forming behaviour of AA5052-H32 & AA6061-T6 during Single Point Incremental Forming | M. S. Shunmugam and M. Kanthababu (eds.), Advances in Forming, Machining and Automation Proceedings of AIMTDR 2018, December 2018. Lecture Notes on Multidisciplinary Industrial Engineering, Series Editor: J. Paulo Davim, Springer Nature Singapore Pte Ltd. Nov. 2019 Online ISBN978-981-32-9417-2 | 17-28 |
| 30 | J.S. Bhat, B.U. Sonawane, M.R. Desai | Finite Element Analysis of Tribological Properties of Worm Gear Under Wet Condition | International Journal of Advanced Science and Technology , 29(8s), June 2020.E-ISSN: 2207-6360 | pp 5238-5243 |
| 2020-21 | ||||
| 31 | Nitin Kamble, Bhagwan Sonawane, B.B. Ahuja, Sandeep Sarnobat | Grey relational analysis for fluid assisted blank holding system in deep drawing process for Al alloy 1050 by using a numerical simulation | International Journal of Manufacturing Technology and Management, 2021 Vol.35 No.2, (Received: 16 Mar 2017 | 109 – 126 |
| 32 | Jitendra Bhat, Bhagwan Sonawane, Milind Desai and Udaysinh Bhapkar | The compound Taguchi and grey relational analysis used to optimize the tribological parameters of worm gear under wet condition | Materials Today: Proceedings, June 2021. https://doi.org/10.1016/j.matpr.2021.05.248
| |
| 33 | J. S. Bhat and B. U. Sonawane | Condition Monitoring of Worm Gearbox Through Oil Analysis | In: Parey A., Kumar R., Singh M. (eds) Recent Trends in Engineering Design. Lecture Notes in Mechanical Engineering. Springer, Singapore. June 2021 | pp 289-296 |
| 34 | Shruti Gaikwad; Dr. B. U. Sonawane, Somil Shrivastava and Manoj Gurav | Implementation of Material Requirement Planning System to Streamline the Process Flow of Production Planning and Control | 11th edition of Conference on Excellence in Research and Education (CERE), at the Indian Institute of Management Indore, 18–20th June 2021. | |
| 35 | M. M. Ghadmode, Arpit R. Patil, B. U. Sonawane, and Amrut Mulay | Analysis of TIG-Welded Aluminum Alloys During Single Point Incremental Forming at Different Wall Angles | Harshit K. Dave • Dumitru Nedelcu Editors, Advances in Manufacturing Processes (Proceedings of RAM 2020) Lecture Notes in Mechanical Engineering, Springer Publication ISBN 978-981-15-9116-7 ISBN 978-981-15-9117-4 (eBook) https://doi.org/10.1007/978-981-15-9117-4 | Pp 187-203 |
| 2021-22 | ||||
| 36 | J.S. Bhat, A.B Chougale, B.U. Sonawane | Investigation of Tribological Based Thermal Behaviors of Lubricating Oil of Worm Gearbox: A Review | Advances in Mechanical and Materials Technology, ISBN 978-981-16-2793-4. Volume 47, Part 17, Jan 2022 | pp 1153-1161 |
| 37 | Manoj M. Ghadmode, Bhagwan U. Sonawane, and Udaysinh S. Bhapkar
| Experimental investigation of tailor welded blanks of dissimilar aluminum alloys | Materials Today: Proceedings, 2021,
ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2021.10.095.
Available online 6 November 2021 | |
| 38 | Abhijeet Zade, B. U. Sonawane | Experimental Investigation of Material Behaviour in Single Point Incremental Forming using Static Tool Condition for Aluminium Alloy
| International Journal of Mechanical and Production Engineering (IJMPE)-IJMPE, Volume-9, Issue-9, August 2021 | 26-30 |
| 39 | Nilesh P. Dakhore, Dr. B. U. Sonawane and M. M. Ghadmode | Experimental Investigation of AA5052 in Single Point Incremental Forming Using Dynamic Tool Condition | Proceedings of the 2nd Indian International Conference on Industrial Engineering and Operations Management Warangal, Telangana, India, August 16-18, 2022 | 1314-1323 |
| 40 | Ganesh Madhukar Chaudhari and B.U. Sonawane | Improvement of Program Staffing Management Activity by Application of Excel Macro Automation Tool | Proceedings of the 2nd Indian International Conference on Industrial Engineering and Operations Management Warangal, Telangana, India, August 16-18, 2022 | 1526-1538 |
| 41 | Chaitanya Ashokrao Watane and Dr. B. U. Sonawane | IoT-Mobile Enabled Smart Air Cooler with Humidity Control | Proceedings of the 2nd Indian International Conference on Industrial Engineering and Operations Management Warangal, Telangana, India, August 16-18, 2022 | 1818 |
