Dr. B. Rajiv
Associate Professor
rbh.mfg@coeptech.ac.in
Department of Manufacturing Engineering and Industrial Management
Phone: +91-20-25507702; 9850490340; 9511885801
Qualification
| Qualification | Specialization | University/Institution | Year |
|---|---|---|---|
| PhD | Production and Industrial Engineering | College of Engineering, Pune (COEP) | 2008 |
| ME | Production Engineering | College of Engineering, Pune (COEP) | 2003 |
| BE | Production Engineering | Nagpur University | 1998 |
Experience
| Experience Type | Duration |
|---|---|
| Industrial Experience | 3 years |
| Teaching Experience | 22 years |
Research Interest/Area
Optimization, Manufacturing Engineering, Reliability Engineering, EDM, Micromachining.
Ph D : Completed 6, Working 2
| Sr No | Name of Ph D Student | Title | Year | Status |
| 1 | Mr Pankaj Gaigole | Experimental Investigation and Optimization in EDM of some metal matrix composites | 2020 | Completed |
| 2 | Mr Sagar Hiwale | An Investigation on Parametric Optimization in Laser Cutting of Advanced Material | 2021 | Completed |
| 3 | Mr Yogesh Kamble | Mapping Up Of Centre Drill Geometry Under Friction Drilling Process | 2022 | Completed |
| 4 | Ms Swati Kambale | Condition monitoring & hot ferrography of sliding pairs | 2022 | Completed |
| 5 | Mr Rajendra Chahvan | Supplier Relationship Development Strategies | 2022 | Completed |
| 6 | Mr Vikas Kanake | Experimental Investigation on Machining of Steel Alloy by Laser Assisted Hybrid Micro EDM (Co-Guide) | 2024 | Completed |
| 7 | Mr Santosh Ingole | Bimetallic Liner Shaped Charge (BMLSC) Development for Penetration Performance (Co-Guide) | 2024 | Thesis Submitted |
| 8 | Mr Vishwanath Chavan | Experimental Investigation of Micro Machining Process for Micro Rod Fabrication | 2025 | Pre-Synopsis |
Patents (Granted)
| # | Patent Number | Title | Status |
|---|---|---|---|
| 1 | 4865/MUM/2015 | Under Run Protection Device for Four Wheeler Vehicles Having Low Ground Clearance | Granted |
| 2 | 45356/2020-MUM | Design and Development of slotted center drilling tool for friction drilling process | Granted |
| 3 | 202021035857 | Analysis and development of non-conventional heat engine using surrounding heat, industrial waste heat and solar power to generate electricity | Granted |
Books
| Type | Authors | Title | Publisher | Place | Month/Year | ISBN |
|---|---|---|---|---|---|---|
| Book | S K Basu, K C Sahu and B Rajiv | Industrial Organization and Management | PHI | New Delhi | November 2011 | 9788120344211 |
Book Chapters (last Five Years)
| Sr. No. | Authors | Title and Publication Details |
|---|---|---|
| 1 | Yogesh Kamble, R. Rajiv, P D Pantawane and b B Ahuja | Design and Development of Combination Tool for Drilling and Tapping Operation on PVC, Springer Nature Singapore Pte Ltd. 2020, ISBN No. 2522- 5022. |
| 2 | Mahesh Godse | Improvement of Project Management Knowledge Areas Using Scrum Technique, Optimization Methods in Engineering Select Proceedings of CPIE 2019, Springer Nature Singapore Pte Ltd. 2021, ISBN No. 2522-5022. 133-150, ISSN 2522-5022 ISSN 2522-5030 (electronic) Lecture Notes on Multidisciplinary Industrial Engineering ISBN 978-981-15-4549-8 ISBN 978-981-15-4550-4 (eBook) |
| 3 | Pankaj Gaigole, S. G. Kale, J. K. Bagwan, B. Rajiv, and B. B. Ahuja | Simultaneous Optimization of Machining Process Parameters of Near-Dry Rotary EDM Using Grey Relational Analysis, pp 209-226, Optimization Methods in Engineering Select Proceedings of CPIE 2019, Springer Nature Singapore Pte Ltd. 2021, ISBN No. 2522-5022. 133-150, ISSN 2522-5022 ISSN 2522-5030 (electronic) Lecture Notes on Multidisciplinary Industrial Engineering ISBN 978-981-15-4549-8 ISBN 978-981-15-4550-4 (eBook) |
| 4 | Sagar Hiwale and B. Rajiv | Investigations of Laser Machining Parameters Using Taguchi Approach for Response Kerf Ratio, Recent advances in Smart manufacturing and materials” under Lecture Notes in Mechanical Engineering published by Springer Nature Singapore. |
Conference papers (last Five Years)
| Sr. No. | Authors | Title | Conference Details |
|---|---|---|---|
| 1 | Yogesh Kamble, Dr P D Pantawane, Dr B. Rajiv and Dr. B.B. Ahuja | Design and Development of Combination Tool for Drilling and Tapping Operation on PVC Polymeric Material | 7th International & 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference 2018, December 13th-15th 2018, College of Engineering Guindy, Anna University, Chennai, India. |
| 2 | Yogesh Kamble, Dr P D Pantawane, Dr B. Rajiv | Development of Pull out Force Measuring setup for Form Tapped AL 6063 tube over previously friction drilled holes | ICMAX 2019, K K Wagh Nasik, Feb, 15-16 – 2019. |
| 3 | Vivek M Patil, Dr. B Rajiv | Thinking beyond One Dimension | ICMAX 2019, K K Wagh Nasik, Feb, 15-16 – 2019. |
| 4 | Divya Chavan, Dipali Avahale and Dr. B.Rajiv | Critical analysis of automobile components by FMEA and Pareto Analysis | International conference on “ Reliability, Risk Maintenance & Engineering management “(ICRRM 2019). |
| 5 | Pankaj Gaigole and Dr. B. Rajiv | Parametric study on near-dry rotary electrical discharge machining of aluminum matrix composite material (SiCp/Al) | International Conference and Expo on Emerging Trends in Mechanical Engineering International Conference e-TIME 2019, Nagpur, April, 5-6 2019. |
| 6 | Pankaj Gaigole and Dr. B. Rajiv | Multi-objective optimization of machining characteristics in near dry rotary electrical discharge machining of AlSiC by WPCA. | 1st International Conference on Innovative Product Design and Intelligent Manufacturing System NIT Rourkela, ICIPDIMS-2019. |
| 7 | Pankaj Gaigole Sachin Kale, Jameer Bhagwan, Dr. B Rajiv and Dr. B.B.Ahuja | Simultaneous Optimization of Machining Process Parameters of Near-Dry Rotary EDM Using Grey Relational Analysis | 6th International Conference on Production and Industrial Engineering (CPIE-2019), Dr. B R Ambedkar National Institute Of Technology Jalandhar-144011, India. |
| 8 | Mahesh Suresh Godse, Dr. Rajiv B. | Improvement Of Project Management Knowledge Areas Using Scrum Technique | 6th International Conference On Production and Industrial Engineering (CPIE-2019), DR B R Ambedkar National Institute of Technology Jalandhar-144011, India. June 8-10 2019. |
| 9 | P D Pantawane, Dr B Rajiv and Dr B B Ahuja | Design and testing of online acoustic emission and vibration monitoring system for machining operation | COPEN 2019, IIT Indore, Dec 2019. |
| 10 | Sagar Hiwale and B. Rajiv | Investigations of Laser Machining Parameters Using Taguchi Approach for Response Kerf Ratio | ICEM 2020 (International Conference in Evolution in Manufacturing), National Institute of Technology, Jaipur, 10-12th Dec 2020. |
| 11 | Sagar Hiwale and B.Rajiv | “Experimental Investigations of Laser Machining Process Parameters Using Response Surface Methodology” | iCADMA 2020, International Conference on Advances in Materials Processing & Manufacturing Applications (iCADMA 2020), NIT Uttarakhand, November 5-6, 2020. |
| 12 | Kaustubh Raut , Dr. B Rajiv, Dr. Pankaj Gaigole, Dr. P. D. Pantawane | “Experimental Investigation and Optimization in Near Dry EDM of Aluminum Silicon Carbide” | International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (December 19-20, 2020). |
| 13 | Yogesh Kamble, Parameshwar Jadhav and Rajiv B. | Experimental Investigation and Dimensional Analysis of friction drilled hole on 6082 Aluminium pipe using hardened M2 center drill | Second International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2020) 20 – 21, November 2020. |
| 14 | Umesh Joshi, Rajiv B. and Rakesh Mulik | Critical Analysis of Hybrid Electric Vehicle using Linear Programming: A Review | First International Conference on Intelligent Robotics, Mechatronics and Automation Systems (IRMAS 2021), Vellore Institute of Technology, Chennai. |
| 15 | Swati Kamble and Dr B Rajiv | A Fault Identification of Machines Through WPA by Using Ferrography: Review | International Conference on Technological Innovations in Mechanical Engineering (TIME – 2021), Sharda University, Uttar Pradesh, India. |
| 16 | Shubham Najan, Dr. B. Rajiv | Experimental Investigation and Optimization of PM-EDM by using Al Powder on Tungsten Carbide | International Conference on Recent Advances in Manufacturing-Ram 2021, NIT Surat 10-12 June 2021. |
| 17 | Swati Kamble and Dr B Rajiv | “Improving machine life by applying strategy of condition monitoring using Ferrography” | International Conference on Recent developments on Materials, Reliability, Safety & Environmental issues – 2021, Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab. |
| 18 | Swati Kamble and Dr B Rajiv | “Wear measurement by real time condition monitoring using ferrography” | International Conference on Advanced Manufacturing & Materials Processing, Malviya National Institute of Technology, Jaipur. |
| 19 | Swati Kamble and Dr B Rajiv | Significance of Risk Priority Number in Machine Condition Monitoring | 2nd International Conference on Functional Materials, Manufacturing and Performances ICFMMP-2021, Lovely Professional University, Jalandhar. |
| 20 | Vishwanath Chavan and Dr B Rajiv | Need of Micro Turning: A Review” (CIMS_ 177) | 2nd International Conference on Industrial and Manufacturing Systems (CIMS-2021), Dr. B R Ambedkar National Institute of Technology (NIT), Jalandhar and Punjab Engineering College (PEC), Chandigarh. |
| 21 | Vishwanath Chavan, B. Rajiv | Selection of the best material and cutting tool in multi-objective optimization challenges of Biomaterial Implants using the R-method | 4th International conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN) 2022, Jaipur. |
| 22 | Swati Kamble and Dr B Rajiv | Recent Nanotribological tools used in industries for condition monitoring | TRIBOINDIA 2021 – An International Virtual Tribology Conference. |
| 23 | Swati Kamble and Dr B Rajiv | Wear mechanism mapping of C45 under dry sliding operating condition | TRIBOINDIA 2021 – An International Virtual Tribology Conference. |
| 24 | Somshekhar P. Naikwade, Dr B Rajiv | Design of ARM Controlled Cell Balancing Network-based Battery Management System for Electrical Vehicle | 2nd Indian International Conference on Industrial Engineering and Operations Management. |
| 25 | Shivshankar Dumne and Dr B Rajiv | Tribological Behavior of EN24 Steel With OHNS By Using Pin On Disc) | International Conference on Industrial Engineering and Operations Management (IEOM). |
| 26 | Sweta Meshram and Dr B Rajiv | Implementation of Quality Risk Management by Application of HOR Method in Drug Development Process | International Conference on Industrial Engineering and Operations Management (IEOM). |
| 27 | Shreeji Mahendra Pathak | Software Test Automation of Electronic Controller Unit | International Conference on Industrial Engineering and Operations Management (IEOM). |
| 28 | P.M.Gaigole and B Rajiv | Multi-Performance characteristics optimization in near-dry rotary EDM of AlSiC by weighted principal component analysis | Fourth International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2022). |
| 29 | Pankaj Ashok Hole, P.D.Pantawane and B.Rajiv | “Investigation of Response Parameters on Vibration Assisted Micro-Edm On Ti–6Al–4V Alloy.” | International Conference on Industrial Engineering and Operations Management (IEOM). |
| 30 | Vishwanath Chavan and Dr B Rajiv | Micromachining techniques for manufacturing high aspect ratio microelectrodes: A Review | 7th International Conference on Production & Industrial Engineering (CPIE-23). |
| 31 | Shubham Mogarkar, Dr B Rajiv, Vishwanath Chavan and Vikas Kanake | Experimental Investigation of Hydrodynamical Polishing Of Hard Steel Alloys Using SiC Abrasive And Modelling with ANN | 7th International Conference on Production & Industrial Engineering (CPIE-23). |
| 32 | Abhishek Dethe and Dr. Rajiv B | A Novel Design of Robotic Fruit Plucking Manipulator Using Sliding Cutter For Agricultural Drones And Robots | 7th International Conference on Production & Industrial Engineering (CPIE-23). |
| 33 | Sakshi Raut Vikas Singh Sisodia, Sachin Salunkhe, Prakash Pantawane, B Rajiv, Rahul Diggi | Process and dimensional variation analysis of automobile assembly in development phase using Six Sigma DMAIC” | International Journal of Six Sigma and Competitive Advantage. |
| 34 | Swati N. Kamble . B. Rajiv | Size Distribution of Wear Particles by Area and Perimeter Using Hot Ferrography | Fail. Anal. and Preven. |
| 35 | Milind Vantmutte, B Rajiv and Dr M D Jaybhaye | Supplier Selction Using MCDM Techniques | 1st International Conference on Mechanical Engineering: Researches and Evolutional Challenges-2024, NIT Warangal. |
| 36 | Kunal Janwe, Dr M D Jaybhaye, Dr Rajiv B. | Tool Development for Process betterment using low coding automation software Lean manufacturing and Industry 4.O | 2nd International Conference on Mechanical Engineering: Researches and Evolutional Challenges-2024, NIT Warangal. |
| 37 | Kunal Kshirsagar, Dr Rajiv B., Dr M D Jaybhaye | Prioritizing key Performance indicators (KPIS) for enhanced competitiveness: A multi-criteria decision-making approach in clustered manufacturing environments | 2nd International Conference on Mechanical Engineering: Researches and Evolutional Challenges-2024, NIT Warangal. |
Journal Papers
| Sr. No. | Authors | Title | Journal | Details |
|---|---|---|---|---|
| 1 | R D Marwadi, Dr. B. Rajiv, Abhshek Mandana | Analysis of Pressure Variation in Wheel Using Statistical Methods | SAE International Journal | 2019-28-2450 Published 21 Nov 2019 |
| 2 | P. M. Gaigole and B. Rajiv | Near dry rotary electrical discharge drilling of SICp/AL metal matrix composites | Journal of Manufacturing Technology Research | Vol.11, Issue 1-2, 2019, pp 25-46. ISSN No. 1943-8095. |
| 3 | Shivali Lomate, B Rajiv, P D Pantawane, Dr. B.B. Ahuja | “Greedy Algorithm to generate cutting patterns for cutting stock problem (1D and 2D)” | Industrial Engineering Journal | March 2020, pp 29-36, ISSN No.0970-2555. |
| 4 | Sagar Hiwale and B.Rajiv | Experimental Investigations of Laser Machining Process Parameters Using Response Surface Methodology | Materials Today: Proceedings | MATPR-D-20-07129R1 |
| 5 | Sagar Hiwale and B.Rajiv | Experimental Investigations And Parameter Optimization of Laser Machining Process Parameters Using Nature Based Optimization Techniques | International Journal of Modern Manufacturing Technologies | Vol. XII, No. 2, pp 49-59, ISSN 2067-3604, Dec 2020. |
| 6 | Kaustubh Raut , Dr. B Rajiv, Dr. Pankaj Gaigole, Dr. P. D. Pantawane | “Experimental Investigation and Optimization in Near Dry EDM of Aluminum Silicon Carbide” | International Journal of Surface Engineering and MT | |
| 7 | Kamble, Y., Basavarajappa, R. | Experimental investigation and dimensional analysis of friction drilled hole on 6082 aluminium pipe using hardened M2 centre drill | Materials today proceedings | Volume 42, Part 2, 2021, Pages 1239-1243. https://doi.org/10.1016/j.matpr.2020.12.874 |
| 8 | Yogesh Kamble, Parameshwar Jadhav and Rajiv B. | Experimental Investigation and Dimensional Analysis of friction drilled hole on 6082 Aluminium pipe using hardened M2 center drill | Second International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2020) | 20 – 21, November 2020. |
| 9 | Akshay M. Jadhav Dr. PD Pantawane Dr. B Rajiv, Prof. BB Ahuja | Integrated Multi criteria decision making for manufacturing plant location Selection | Industrial Engineering Journal | Volume XIV, Issue No. 03, pp 26-33, March 2021. |
| 10 | Swati Kamble and Dr B Rajiv | Significance of risk priority number in machine condition Monitoring | Materials Today: Proceedings | MATPR_27529, Elsevier Journal, Volume 50 , Part 5, Feb, 2022, Pages 1930-1935, https://doi.org/10.1016/j.matpr.2021.09.317. |
| 11 | Swati Kamble and Dr B Rajiv | Machine Health Monitoring With Life Cycle Cost Analysis by Condition Monitoring | Materials Today: Proceedings | MATPR-D-21-07788R1, Elsevier Journal. |
| 12 | Rajiv B, Pritam Kalos, Prakash Pantawanec, Vikas Chougule, Vishwanath Chavan | Classification of damages in composite material using multi-support vector machine | Journal of The Institution of Engineers (India): Series C | February 2022. |
| 13 | Vishwanath Chavan and B. Rajiv | Selection of the best material and cutting tool in multi-objective optimization challenges of Biomaterial Implants using the R-method | Materials Today proceedings | https://doi.org/10.1016/j.matpr.2022.02.342 2214-7853/. |
| 14 | Swati Kamble and Dr B Rajiv | Critical Analysis of Machine Condition Monitoring by Using Risk Priority Number and Analytical Hierarchy Process | International Journal of Failure Analysis and Prevention | https://doi.org/10.1007/s11668-022-01350-8 |
| 15 | Chavhan R U, B Rajiv and Joshi S P | Find out the relationship between First & Second order factors for competitive advantage using CFA for supplier development in Indian Manufacturing Case | International Journal of Contemporary Architecture “The New ARCH” | Vol. 8 No. 2 (2021). ISSN 2198-7688 pp 1561-1569 |
| 16 | Ritwika Roy, Rohi Jan and B Rajiv | “Functionalization of Bio-polymer based nanofibers with clay minerals as nanofillers: Promising material for antibacterial applications” | Journal of Polymer Research | (2022) 29: 116, 2nd March 2022, https://doi.org/10.1007/s10965-022-02967-x. |
| 17 | P.M.Gaigole and B Rajiv | Multi-Performance characteristics optimization in near-dry rotary EDM of AlSiC by weighted principal component analysis | Journal Materials Today: proceedings | https://doi.org/10.1016/j.matpr.2023.03.075 |
| 18 | Sakshi Raut Vikas Singh Sisodia, Sachin Salunkhe, Prakash Pantawane, B Rajiv, Rahul Diggi | Process and dimensional variation analysis of automobile assembly in development phase using Six Sigma DMAIC” | International Journal of Six Sigma and Competitive Advantage | Online ISSN: 1479-2753 Print ISSN: 147 |
| 19 | Swati N. Kamble . B. Rajiv | Size Distribution of Wear Particles by Area and Perimeter Using Hot Ferrography | Fail. Anal. and Preven. | https://doi.org/10.1007/s11668-024-01855-4 |
| 20 | B. Rajiv, Vishwanath Chavan, Vikas Kanake | Experimental investigation of hydrodynamical polishing of hard steel alloys using SiC abrasive and modelling with ANN | Materials Today: Proceedings | https://doi.org/10.1016/j.matpr.2023.08.115 |
| 21 | R. Roy, R. Jan, U. Joshi, Rajiv B., P.G. Satsangi | Evaluation of bioaerosol inactivation ability of chitosan-based biohybrid nanofibers loaded with aloe vera mediated silver nanoparticles: Sustainable material for environmental protection | Materials Today Sustainability | https://doi.org/10.1016/j.mtsust.2023.100546 |
Recent Teachings (last three years teaching specified)
| Academic Year | Semester | Subject 1 | Subject 2 | Subject 3 | Subject 4 |
| 2023-24 | I | Financial and Project Management | Introduction to Operations Research | Robot Integrated Manufacturing Automation | M.E-I Lab |
| 2023-24 | II | Operations Research | Industrial Engineering and Management, | Quantitative Techniques in Project Management | Fab Shop |
| 2022-23 | I | Financial and Project Management | Introduction to Operations Research | Reliability Engineering | M.E -I Lab. |
| 2022-23 | II | Operations Research | Quantitative Techniques in Project Management | ME-II Lab. | ME _II Lab |
| 2021-22 | I | Financial and Project Management | Introduction to Operations Research | Reliability Engineering | M.E -I Lab. |
| 2021-22 | II | Operations Research | Quantitative Techniques in Project Management | ME-II Lab. | Fab Shop Lab |
Funded Projects
| Sr. No. | Project Title | Cost of Project |
|---|---|---|
| 1 | Measurement and Analysis of Advance Ergonomic Attributes | 10 Lakhs |
| 2 | Investigation in Electrical Discharge Machining of various Metal Matrix Composites | 11.176 Lakhs |
| 3 | MODROB- Metrology Lab Ongoing Project | 12 Lakhs |
| 4 | Development of setup for Hot ferrography of sliding Pairs | 4.5 Lakhs |
| 5 | Center of Excellence Industrial Product Design (Co-PI) | 5.00 Cr. |
Current Advises
| Programme | Name | Roll No./MIS No. | Joining Date | |
| PhD | Mr Vishwnath Chavan Mr Satish Eppar Mr Sunil Ghunage | 132113002
| 01/08/2021 01/07/2023 08/01/2024 | |
| MTech (Project Management)
| Ms Mona Shah | 712398007 | 13/6/2024 | |
| MTech (Manufacturing Engineering and Automation) | Mr Lalit Thorat | 712323003 | 23/6/2024 | |
| MTech (Mechatronics Engg.) | Mr Ashfakh Shaikh | 712394007 | 15/7/2024 | |
| Master of Technology (Robotics & Artificial Intelligence) | Mr Ganesh Dilip Deshmukh
| 712399003 | 25/6/2024 | |
7. Awards and Recognition
| # | Achievement/Award | Details |
|---|---|---|
| 1 | Gold Medal for Best Paper | Awarded for best paper published in the Journal of The Institution of Engineers (India) Production Division Kolkata pp 3-9 Vol 89 Sep 2008. |
| 2 | GATE Qualification | Qualified GATE-2002, 93.69 %tile, Discipline: Production and Industrial Engineering, AIR-118. |
| 3 | GATE Qualification | Qualified GATE-2001, 87.72 %tile, Discipline: Production and Industrial Engineering, AIR-106. |
| 4 | Best Department Award | Awarded Best department in the year 2013/2017/2018 under AICTE –CII as best industry –institute interaction in the country (As Head of the Department). |
| 5 | Best Innovative Award (Guidance) | Guided for best innovative award in the Avishkar 2018 under PG category –Maharashtra State. |
| 6 | Certificate of Appreciation | Received Certificate of Appreciation from Alumni Association of COEP as a guide for Best Innovative Project guide 2017-18 (Prize Instituted by Mr Anand Kanhere and Family members). |
